ADP3192

Rev. 0 | Page 6 of 32

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

VCC

−0.3 V to +6 V

FBRTN

−0.3 V to +0.3 V

PWM3 to PWM4, RAMPADJ

−0.3 V to VCC + 0.3 V

SW1 to SW5

−5 V to +25 V

<200 ns

−10 V to +25 V

All Other Inputs and Outputs

−0.3 V to VCC + 0.3 V

Storage Temperature Range

−65°C to +150°C

Operating Ambient Temperature Range

0°C to 85°C

Operating Junction Temperature

125°C

Thermal Impedance (

θ

JA

)

39°C/W

Lead Temperature

Soldering (10 sec)

300°C

Infrared (15 sec)

260°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

Absolute maximum ratings apply individually only, not in

combination. Unless otherwise specified, all other voltages

referenced to GND.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the

human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.