CTV07R datasheet(51/54 Pages) AMPHENOL

51 / 54 page

Tri-Start – specials

coax, twinax and triax contacts,

ground plane connectors, press fit connectors

Amphenol MIL-DTL-38999 Series III connectors are the most

commonly used connectors for incorporation of shielded contacts

along with traditional crimp contacts and also with contacts for data

bus, LAN and coax/triax/twinax transmission lines with conductive

inserts that ground the outer conductor of the coax, triax, twinax

contact to the shell. These connectors are sold “less contacts”. They

will accommodate size 8 coax, triax or twinax contacts or size 12 and

16 coax contacts.

The insert availability chart on pages 6 and 7 indicates the patterns

that are available in a ground plane version, (see those designated

with a star symbol), and consult how to order pages for ordering

procedures.

CONNECTORS WITH SHIELDED COAX CONTACTS

For shielded wire applications, coaxial contacts can be incorporated

into MIL-DTL-38999 connectors. Designed-in crimp or solder types

are available to fit various RG and special cables. High performance

coaxial contacts eliminate discontinuities or

impedance variations due to movement of

parts under axial load.

Concentric Twinax Contacts

Qualified to M39029/90 and /91

CONNECTORS WITH CONCENTRIC

TWINAX CONTACTS

The size 8 concentric twinax contact was

developed for use in MIL-STD-1553 Airborne

multiplex data bus applications which require

high performance interconnect characteristics

in multi-pin connectors. Ideal for this applica-

tion need is the high performance Tri-Start

connector with its fully scoop-proof feature of

recessed pins. The concentric twinax contact is

crimp terminable to twisted-shielded cable.

SHIELDED TRIAX CONTACTS

Triax contacts have three conductors and are

offered in sizes 8, 10 and 12. They provide

additional shielding when terminated to triax

cable having solid or stranded center conduc-

tors. Each of the three conductors of the triax

contact is separated by dielectric insulation to

isolate ground planes and to improve shielding

effectiveness.

High speed data transmission quadrax

contacts are now available for use in MIL-DTL-

38999 connectors.

PRESS FIT CONNECTORS

Tri-Start connectors are also designed for the

application of solderless mounting to printed

circuit boards. The Press Fit connector perfor-

mances are compatible with Series III

Ground Plane Connector with Twinax

Contacts and Insulated Power/Signal

Contacts

MIL-DTL-38999 Series III

Connectors with Compliant Pin

Contacts for Solderless Mount-

ing on Printed Circuit Boards

Consult the following Amphenol literature for further

information:

Product Data Sheet 139 for Ground Plane Connectors.

Product Data Sheet 188 for Press Fit Connectors.

Catalog 12-130 for High Frequency Contacts for Multi-

pin Connectors.

38999 Series III Connector

with Twinax Contacts and

Standard Contacts

Shielded Coax Contacts

CTV07R датащи(PDF) 51 Page - Amphenol Corporation

CTV07R датащи(HTML) 51 Page - Amphenol Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

датащи скачать

ссылки URL