PIC16F684 datasheet(67/78 Pages) MICROCHIP

67 / 78 page

 2006-2012 Microchip Technology Inc.

DS51292T-page 67

6-PIN SIL CONNECTOR

Debug headers with 6-pin SIL (Single In-Line) connectors are compatible with the tools

listed below.

PICkit 2 or 3 Programmer/Debug Express

The 6-pin socket of the PICkit 2 or PICkit 3 may be directly connected to the 6 header

pins. Be sure to line up pin 1 on PICkit with pin 1 on header.

FIGURE 4:

6-PIN SIL CONNECTION TO A PICKIT

MPLAB ICD 2 or 3 In-Circuit Debugger

The 6-pin modular cable attached to the MPLAB ICD 2 or MPLAB ICD 3 may be

connected to the 6 header pins through the Modular-to-SIL Adapter.

MPLAB REAL ICE In-Circuit Emulator

The 6-pin modular cable attached to the Standard Driver Board may be connected to

the 6 header pins through the Modular-to-SIL Adapter. No SPI trace is available with

this connection because of the loss of the DAT and CLK pins.

The 8-pin socket of the High Speed Driver Board or optional Isolation Unit may be

directly connected to the 6 header pins. Be sure to line up pin 1 on the board with pin

1 on the header.

FIGURE 5:

6-PIN SIL CONNECTION TO AN EMULATOR

Note:

No SPI trace is possible in this case because of the loss of DAT and CLK

pins. However, if the device supports SPI, two additional header pins can

be attached to add this functionality.

PICkit 2 or 3

TOP

Header

Connector

TOP

DAT

CLK

TOP

Header

Connector

MPLAB REAL ICE in-circuit emulator

High-Speed Receiver Board or

optional Isolation Unit

TOP

Optional SPI trace

2-Pin right angle header

to be installed here.

(Digi-Key P/N A32702-02-ND)

PIC16F684 датащи(PDF) 67 Page - Microchip Technology

PIC16F684 датащи(HTML) 67 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

датащи скачать

ссылки URL