ZX2

4

Amplifier and Calculating Unit

T

K

A

B

B

A

S

38mm

72mm

30mm

31mm

64mm

30mm

1

Ease of Use by “LED Display” and “Calculating Unit”

11-segment LED display for intuitive configuration

Easy calculations of measurements

Intuitive operation through

cross buttons

11 Segment LED Display

Determination output indicators

High (orange)/Pass (green)/

Low (orange), two color display

11 Segment LED Display

No need for a manual

Thickness + subtraction mode

Perform two calculations with ease

Equipped with 4 banks

Easy change of setup

The 7 segment display

on existing models

The 11 segment display

on model ZX2

Thickness mode

The compact housing stays just as it is

Sensor 1

Sensor 2

Sensor 1 0criterion

Sensor 2 0criterion

Level difference

S = B - A

Thickness

T=K+(A+B)

Subtraction mode

Existing models

ZX2

Built into the unit

Amplifier unit

+

Bank unit

The calculated results of two sensor heads are displayed on the amplifier unit by just connecting the calculating unit between

the two amplifier units. The calculation function can be chosen from the two modes of thickness and subtraction. It is also

possible to prevent mutual interference by coupling via the calculating units. (Up to five amplifier units can be connected.)

An 11 segment LED display is integrated

in the compact housing. Alphanumeric

characters can be read with ease and

there is no need to refer to a manual.

The amplifier unit is equipped

with four bank functions.

Easy change of setup between

four modes is supported by

just switching between the

bank functions.

Comparison of the existing 7 segment LED display and

the 11 segment LED display