USB4105 datasheet(3/11 Pages) ETC

3 / 11 page

PRODUCT SPECIFICATION

Part

Number

USB4105

Rev

Date

24/10/19

Product

Description

USB Type C Receptacle for USB2.0 ,SMT Type, PCB Top Mount

Page

Doc

Number

USB Type C

Prepared

Checked

Approved

www.gct.co

6.1 Electrical Performance.

Test No

Item

Test Condition

Requirement

6.1.1

Low Level Contact

Resistance

The low level contact resistance measurement is

made from the solder tail of the receptacle to the

soldering point of the plug. When measured at

20mV Max. open circuit at 100mA. Mated test

contacts must be in a connector housing. In

accordance with EIA-364-23, Test Condition B

40mΩ max (initial)

6.1.2

Insulation Resistance

Both unmated and Mated connectors, apply

100V DC for 1 minute at sea level between

adjacent terminal or ground. In accordance with

EIA-364-21.

100 MΩ Min (initial).

6.1.3

Dielectric Strength

Mate connectors, apply

100V AC (RMS) for 1 minute at sea level. In

accordance with EIA-364-20.

No Breakdown.

6.1.4

Contact current rating

A current of 5 A shall be applied collectively to

VBUS pins (i.e., pins A4, A9, B4, and B9) and 1.25

A shall be applied to the VCONN pin (i.e., B5) as

applicable, terminated through the corresponding

GND pins (i.e., pins A1, A12, B1, and B12). A

minimum current of 0.25 A shall also be applied

individually to all the other contacts, as applicable.

The temperature

rise shall not

exceed 30°C at the

outside surface of

the shell.

USB4105 датащи(PDF) 3 Page - List of Unclassifed Manufacturers

USB4105 датащи(HTML) 3 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11

датащи скачать

ссылки URL