Supply Voltage (AVDD18 to GND).......................-0.2V to +2.2V

Supply Voltage (DVDD18 to GND).......................-0.2V to +2.2V

Input to RF Inputs (RMS) .................................................+0dBm

Junction Temperature......................................................+150°C

Storage Temperature........................................ -65°C to +150°C

Operating Case Temperature........................... -40°C to +100°C

Radio Frequency Signals

DC Characteristics

Note 1:

All specifications in this table apply to both paths being enabled.

Note 2:

Peak current includes supply decoupling network. Refer to the Hardware Design Guide for sizing of the voltage regulators.

Note 3:

Note 4:

Continuous adaptation, tracking (100% duty cycled feedback), and advanced features active or inactive.

Note 5:

Duty-cycled feedback power dissipations averaged over on time of 100ms (9%) and off time of 1.0s (91%).

Note 6:

Power dissipation can be FW dependent. Refer to the FW release notes for any changes to values listed above.

Note 7:

See the Operating Frequency Range table for frequency limits of each defined band.

Note 8:

Correction performance across range of input signal BWs also depends on PA output power and carrier configuration.

PARAMETER (Note 1)

MIN

TYP

MAX

UNITS

Supply Voltage (DVDDIO to GND)

1.7

1.8

1.9

V

Supply Voltage (AVDD18 to GND)

1.7

1.8

1.9

V

Supply Voltage (DVDD18 to GND)

1.7

1.8

1.9

V

Supply Peak Current (DVDDIO to GND) (Notes 2, 3, 5, 6)

50

mA

Supply Peak Current (AVDD18 to GND) (Notes 1, 2, 3, 5)

1300

mA

Supply Peak Current (DVDD18 to GND) (Notes 1, 2, 3, 5)

400

Average Power Dissipation: Full-Speed Adaptation (Notes 3, 4, 6)

1950

mW

Average Power Dissipation: Duty-Cycled Feedback (Notes 3, 5, 6)

1500

mW

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

f

698

2700

MHz

Input Signal Bandwidth (Note 8)

1.2

60

MHz

Noise Power

Relative to -3dBm at RFOUT

-137

dBm/Hz

RFINDLY-RFOUT Preamp Gain

G

When set to default FW settings

10

dB

RFINDLY-RFOUT Preamp Gain

+1

dB

-2

Path A/B Isolation

ISO

At 2700MHz

43

dB

SC2200

Dual RF Power Amplifier Linearizer (RFPAL)

www.maximintegrated.com

Maxim Integrated │ 2

Absolute Maximum Ratings

Warning: Any stress beyond the ranges indicated may damage the device permanently. The specified stress ratings do not imply functional performance in these ranges. Exposure of the device

to the absolute maximum ratings for extended periods of time is likely to degrade the reliability of this product