Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Measuring sensor with multiple switch points

OMR50M-R300-UEP-V1

4

This provides three different options for operation:

A empty -> zero start point

Resetting to Factory Settings:

Factory settings can be restored by pressing the "SET" button for > 10 s with the rotary switch in the "Run" position. The yellow and green LEDs

go out simultaneously to indicate that this procedure has been completed. The reset starts when the "SET" button is released. The green LED

lights up to indicate that the reset has completed successfully. After completing the reset, the sensor will immediately function with the factory

settings.

A < B -> rising slope

A > B -> falling slope

0

10

AB

0

10

BA

0

10

B