SN10 datasheet(39/98 Pages) ETC1

39 / 98 page

ILEC SN10 User Manual

Configuring the SN10 (Setup Pages)

5.8.4 2-Seat LCD Contrast

If you have a two-seat SN10, you can adjust the contrast of the 2

nd seat display a small

amount with this setting. Change this only from the 2

nd seat SN10 display (if you change

this on the main unit, you cannot see the contrast change).

5.8.5 Task: Competition or Touring

If you set Competition here, only those points marked Turnpoint in the SN10 database

will be available to select as turnpoints on the task page. Select Touring if you want both

turnpoints and points marked Airport available as turnpoints for your task. Touring is a

useful setting while flying casually, when you want all the airports in the database

available on the task page.

5.8.6 Cruise/Climb Switching

Select External Switch if you are using a switch such as a flap switch, trim switch, or

switch on the stick to control the cruise/climb variometer switching. Select Automatic if

you wish the SN10 to automatically detect circling with the built-in G-meter, switching to

climb vario when circling is detected.

5.8.7 GPS Type

Select NMEA for any GPS unit that provides an NMEA output stream. This includes all

IGC-approved flight recorders we know of, and most commercial GPS units except the

very cheapest. If you have no GPS connected, select None.

The SN10 requires GPS NMEA-183 data to be transmitted to the SN10 at 4800 baud,

per the NMEA standard. If your GPS has a user-adjustable NMEA transmit baud rate,

set it to 4800. If your GPS has user-configurable NMEA sentences, select (GP)RMC

and (GP)GGA (if these aren’t available, select GLL).

5.8.8 Language

Select either English or German with this option. All HELP text and SN10 messages will

be given in the selected language, and selected fields will be displayed differently as

well.

Software Version 2.31

Manual Revised 13-Dec-2005

Page 32 of 91

SN10 датащи(PDF) 39 Page - List of Unclassifed Manufacturers