| поискавой системы для электроныых деталей |
|
SN10 датащи(PDF) 21 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
SN10 датащи(HTML) 21 Page - List of Unclassifed Manufacturers |
|
21 / 98 page ![]() ILEC SN10 User Manual SN10 Flight Pages – Competition Mode 3.7 GPS Page The GPS page displays current GPS information, and allows you to mark a point and then navigate back to this point. Use the Mark Position feature to mark a thermal, a landing field, or a strong point in a wave. This page is infrequently used during flight. Place the cursor on Mark Position and press ENTER to mark your position. This saves your current position as the point GPSmark in the database, and then shows you the distance out and bearing back to this point. The illustration shows you 2.6 miles out from the point you marked, and you need to turn right slightly to track 269 degrees back to the point. WARNING The GPSmark point is marked in the database as a landing point. Thus, you can use this Mark Position to remember the location of a landing field. However, if you use Mark Position to mark a thermal, remember not to use this point as a landing field on the Alternates or Moving Map pages. When the GPS is operating normally, the small N blinks (we call this the GPS blinker). If the GPS is searching but not yet navigating, you will see a blinking ?. If no signal is received from the GPS engine (no power, not plugged in, etc.) you will see a ‘broken line’ symbol here. If no input is received from the GPS, the SN10 will give you an alert message suggesting you check the GPS connection; usually this happens when you forget to plug in the flight recorder. If the GPS is communicating with the SN10 but is unable to find your position, you will receive an alert that the GPS is not navigating. If your GPS fails, you can select GPS: Off at the top of this page, and use the SN10 in dead-reckoning mode (see the Appendix Using the SN10 without GPS below). Many GPS units do not provide the number of satellites used or accuracy measurements. In this case, you will see Accur: instead of a measure of the current GPS position accuracy. Software Version 2.31 Manual Revised 13-Dec-2005 Page 14 of 91 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |