| поискавой системы для электроныых деталей |
|
SST26VF064BEUI датащи(PDF) 74 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
SST26VF064BEUI датащи(HTML) 74 Page - Microchip Technology |
|
74 / 81 page ![]() 2015-2018 Microchip Technology Inc. DS20006138A-page 74 SST26VF064BEUI A Major Section consists of Sector Type Number, Num- ber of Sector of this type, and the Block-Protection Bit Start/End locations. This is tied directly to JEDEC Flash Parameter Table Sector Size Type (in 7th DWORD and 8th DWORD section). Note that the contiguous 4KByte Sectors across the full memory range are not included on this section because they are not defined in the JEDEC Flash Parameter Table Sector Size Type sec- tion. Only the sectors/blocks that are dependently tied with the Block-Protection Register bits are defined. A major section is a partition of contiguous same-size sectors/blocks. There will be several Major Sections as you dissect across memory from 000000h to the full range. Similar sector/block size that re-appear may be defined as a different Major Section. 12.1.1 SECTOR TYPE NUMBER Sector Type Number is the sector/block size typed defined in JEDEC Flash Parameter Table: SFDP address locations 4CH, 4EH, 50H, and 52H. For SFDP address location 4CH, which is Sector Type 1, the size is represented by 01H; SFDP address location 4EH, Sector Type 2, size is represented by 02H; SFDP address location 50H, Sector Type 3, size is repre- sented by 03H; and SFDP address location 52H, Sec- tor Type 4, size is represented by 04H. Contiguous Same Sector Type # Size can re-emerge across the memory range and this Sector Type # will indicate that it is a separate/independent Major Section from the previous contiguous sectors/blocks. 12.1.2 NUMBER OF SECTORS Number of Sectors represents the number of contigu- ous sectors/blocks with similar size. A formula calcu- lates the contiguous sectors/blocks with similar size. Given the sector/block size, type, and the number of sectors, the address range of these sectors/blocks can be determined along with specific Block Locking Reg- ister bits that control the read/write protection of each sectors/blocks. TABLE 12-2: SECTION DEFINITION Major Section X Section X: Sector Type Number Section X: Number of Sectors Section X: Block-Protection Register Bit Start Location Section X: Block-Protection Register Bit End Location |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |