DocID031510 Rev 4

5/32

LIS25BA

List of figures

32

List of figures

Figure 1.

Pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Figure 2.

RMS noise (in band) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 3.

RMS noise (out of band). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 4.

TDM interface characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 5.

I²C slave timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Figure 6.

TDM block diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Figure 7.

Axes X, Y, Z mapped to SLOT0, SLOT1, SLOT2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Figure 8.

Axes X, Y, Z mapped to SLOT4, SLOT5, SLOT6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Figure 9.

WCLK, SDOUT change on the falling edge of BCLK

and are valid on the rising edge of BCLK, no delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Figure 10.

WCLK, SDOUT change on the rising edge of BCLK

and are valid on the falling edge of BCLK, no delay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Figure 11.

WCLK, SDOUT change on the falling edge of BCLK

and are valid on the rising edge of BCLK, delayed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Figure 12.

WCLK, SDOUT change on the rising edge of BCLK

and are valid on the falling edge of BCLK, delayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Figure 13.

Power-on sequence (TDM interface) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Figure 14.

Disabled mode sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Figure 15.

LGA-14 2.5x2.5x0.86 mm package outline and mechanical data. . . . . . . . . . . . . . . . . . . . 28

Figure 16.

Carrier tape information for LGA-14 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Figure 17.

LGA-14 package orientation in carrier tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Figure 18.

Reel information for carrier tape of LGA-14 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30