UBX-15025564-R16 datasheet(23/30 Pages) U-BLOX

23 / 30 page

SARA-N2 series - Data Sheet

UBX-15025564 - R16

Product handling

Page 23 of 30

7.2 Moisture Sensitivity Levels

⚠ SARA-N2 series modules are Moisture Sensitive Devices (MSD) in accordance to IPC/JEDEC

specification

The Moisture Sensitivity Level (MSL) relates to the packaging and handling precautions required.

SARA-N2 series modules are rated at MSL level 4. For more information regarding moisture

sensitivity levels, labeling, storage and drying, see the u-blox Package Information Guide [3].

☞ For the MSL standard, see IPC/JEDEC J-STD-020 (can be downloaded from www.jedec.org).

7.3 Reflow soldering

Reflow profiles are to be selected according to u-blox recommendations (see the SARA-N2 series

System Integration Manual [2]).

⚠ Failure to observe these recommendations can result in severe damage to the device!

7.4 ESD precautions

⚠ SARA-N2 series modules contain highly sensitive electronic circuitry and are Electrostatic

Sensitive Devices (ESD). Handling SARA-N2 series modules without proper ESD protection may

destroy or damage them permanently.

SARA-N2 series modules are Electrostatic Sensitive Devices (ESD) and require special ESD

precautions typically applied to ESD sensitive components.

Table 7 reports the maximum ESD ratings of the SARA-N2 series modules.

Proper ESD handling and packaging procedures must be applied throughout the processing, handling

and operation of any application that incorporates SARA-N2 series module.

ESD precautions should be implemented on the application board where the module is mounted, as

described in the SARA-N2 series System Integration Manual [2].

⚠ Failure to observe these recommendations can result in severe damage to the device!

UBX-15025564-R16 датащи(PDF) 23 Page - u-blox AG