Final Datasheet

1

Rev. 1.0

www.infineon.com

2018-04-04

TLE5014D

Preface

This document is an addendum to the TLE5014 datasheet and describes the

TLE5014D dual die angle sensor. For all parameters which are not specified

here, the TLE5014 datasheet is valid.

Features

• Giant Magneto Resistance (GMR)-based principle

• Two identical dies in one package (providing channel 1 and channel 2 output)

• Fully redundant 2-channel solution for highest functional safety requirements

• High voltage and reverse polarity capability

• EEPROM for storage of configuration (e.g. zero angle) and customer specific ID

• 12 bit representation of absolute angle value on the output

• Max. 1° angle error over lifetime and temperature range

• Developed according to ISO26262 with process complying to ASIL-D

• Internal safety mechanisms with diagnostic coverage >97% for each channel

• Interfaces: PWM, SPC, SENT (based on SAE J2716-2010)

• 32 point look-up table to correct for systematic angle errors (e.g. magnetic circuit)

• 112 bit customer ID (programmable)

• Automotive qualified Q100, Grade 1: -40°C to 125°C (ambient temperature)

Functional Safety

• Safety Manual and Safety Analysis Summary Report available on request

Applications

The TLE5014 GMR-based angle sensor is designed for angular position sensing in automotive applications.

Fully redundancy of two chips in one package supporting highest functional safety requirements.

Description

Table 0-1

Derivative Ordering codes (see Chapter 4 for description of derivatives)

Product Type

Marking

Ordering Code

Package

Comment

TLE5014S16D

014SD

SP001410046

PG-TDSO-16

SENT Interface

TLE5014C16D

014CD

SP001410042

PG-TDSO-16

SPC Interface

TLE5014P16D

014PD

SP001673472

PG-TDSO-16

PWM Interface