Final Datasheet

12

Rev. 1.0

2018-04-04

TLE5014

Specification

3

Specification

3.1

Absolute Maximum Ratings

Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute

ratings; exceeding only one of these values may cause irreversible damage to the device.

Table 3-1

Maximum Ratings for Voltages and Output Current

Parameter

Symbol

Values

Unit

Note / Test Condition

Min.

Typ.

Max.

Absolute maximum supply

voltage

-18

26

V

for 40h, no damage of device;

Voltage Peaks

30

V

for 50µs, no current limitation

Absolute maximum voltage

for pin IFB

-18

19.5

V

for 40h; no damage of device,

Absolute maximum voltage

for pin IF1, IF2, IF3, IFA, IFC

-0.3

6

V

no damage of device

Voltage Peaks (for pin IFB)

30

V

for 50µs, no current limitation

Maximum current through

output in case of short

circuit

40

mA

for 40h, no damage of the

device, current limited by

device

Table 3-2

Maximum Temperature and Magnetic Field

Parameter

Symbol

Values

Unit

Note / Test Condition

Min.

Typ.

Max.

Maximum ambient

temperature

-40

125

°C

Q100, Grade 1

Maximum allowed magnetic

field

B

200

mT

Maximum allowed magnetic

field

B

150

mT

1) Air-conditioning of ware houses, distribution centres etc. is not necessary, if the combination of the specified limits

of 75% R.H. and 40 °C will not be exceeded during storage for more than 10 events per year, irrespective of the

duration per event, and one of the specified limits (75 % R.H. or 40 °C) will not be exceeded for longer than 30 days

per year

2) See Infineon Application Note: “Storage of Products Supplied by Infineon Technologies”

5

40

°C

for dry packed devices,

Relative humidity < 90%,

storage time < 3a