Am79D2251

19

Transmit and Receive Paths

In this section, the transmit path is defined as the analog input to the ISLAC device (VINn) to the

PCM voice output of the ISLAC A-law/µ law speech compressor (See Figure 7-1 in the Am79R2xx/

Am79D2251x Technical Reference). The receive path is defined as the PCM voice input to the

ISLAC speech expander to the analog output of the ISLAC device (VOUTn). All limits defined in this

section are tested with B = 0, Z = 0 and X = R = RG = 1.

When RG is enabled, a gain of –6.02 dB is added to the digital section of the receive path.

When AR is enabled, a nominal gain of –6.02 dB is added to the analog section of the receive path.

When AX is enabled, a nominal gain of +6.02 dB is added to the analog section of the transmit path.

When relative levels (dBm0) are used in any of the following transmission characteristics, the

specification holds for any setting of (AX + GX) gain from 0 to 12 dB or (AR + GR) from 0 to –12 dB.

These transmission characteristics are valid for 0 to 70°C.