LPC47M14X datasheet(118/205 Pages) SMSC

118 / 205 page

SMSC DS – LPC47M14X

Page 118

Rev. 03/19/2001

The state machine will reset after 11 clocks and the process will restart. The process will continue until it is shut off by

setting the SPEKEY_EN bit (see following sub-section).

The state machine will reset if there is a period where the clock remains high for more than one keyboard clock

period (115-145usec) in the middle of the transmission (i.e., before clock 11). This is to prevent the generation of a

false PME.

The SPEKEY_EN bit at bit 1 of the CLOCKI32 register at 0xF0 in Logical Device A is used to control the “wake-on-

specific feature. This bit is used to turn the logic for this feature on and off. It will disable the 32kHz clock input to the

logic. The logic will draw no power when disabled. The bit is defined as follows:

0= “Wake on specific key” logic is on (default)

1= “Wake on specific key” logic is off

Note: The generation of a PME for this event is controlled by the PME enable bit (located in the PME_EN1 register

at bit 5) when the logic for feature is turned on.

6.17 FAN SPEED CONTROL AND MONITORING

The LPC47M14x implements fan speed control outputs and fan tachometer inputs. The implementation of these

features are described in the sections below.

6.17.1

Fan Speed Control

The fan speed control for the LPC47M14x is implemented as pulse width modulators with fan clock speed selection.

Pins 54 and 55 are the fan speed control outputs, FAN2 and FAN1, respectively, muxed with GPIOs. These fan

control pins come up as outputs and are low following a VCC POR and Hard Reset. These pins may not be used for

wakeup events under VTR power (VCC=0).

The configuration registers are defined in the “Runtime Registers” section.

Fan Speed Control Summary

The following table illustrates the different modes for the fans.

Table 57 – Different Modes for Fan

FANX CLOCK

CONTROL

BIT

(NOTE 1)

FANX

CLOCK

MULTIPLIER

BIT

(NOTE 2)

FANX

CLOCK

SOURCE

SELECT

BIT

(NOTE 3)

FANX

CLOCK

SELECT

BIT (NOTE

FOUT

6-BIT DUTY

CYCLE

CONTROL

BITS[6:1]

(DCC)

DUTY CYCLE

(%)

0Hz – LOW

15.625kHz

1-63

(DCC/64)

23.438kHz

• 100

40Hz

60Hz

31.25kHz

46.876kHz

80Hz

120Hz

0Hz – HIGH

Note 1: This is FANx Register Bit 0

Note 2: This is Fan Control Register Bit 2 or 3

Note 3: This is Fan Control Register Bit 0 or 1

Note 4: This is FANx Register Bit 7

LPC47M14X датащи(PDF) 118 Page - SMSC Corporation

LPC47M14X датащи(HTML) 118 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL