CS9236

DS214PP11

23

Registered Parameters

PITCH BEND SENSITIVITY (RPN 00)

RPN

DATA

MSB

LSB

MSB

LSB

00H

00H

mmH

llH

DESCRIPTION

PITCH BEND SENSITIVITY (RPN 00)

mm: sensitivity in semitones

Range is 00 - 18H (+/-0 to +/-24 semitones, default is +/-2 semitones)

ll: sensitivity in cents

Ignored

The PITCH BEND SENSITIVITY parameter (MIDI Registered Parameter Number 00) is used to set the amount of pitch

change which will result from subsequently received PITCH BEND CHANGE messages. The PITCH BEND SENSITIV-

ITY is channel specific (independent values are maintained for each MIDI channel). The CS9236 default sensitivity is +/-2

semitones (a maximum value of PITCH BEND CHANGE will result in a pitch change of +2 semitones, the minimum value

of PITCH BEND CHANGE will result in a pitch change of -2 semitones). The maximum sensitivity for the CS9236 is +/-

24 semitones (+/- two octaves). See description of REGISTERED PARAMETER NUMBER (Controllers 100 and 101) and

DATA ENTRY (Controllers 6 and 38) Control Change messages.

FINE TUNING (RPN 01)

RPN

DATA

MSB

LSB

MSB

LSB

00H

01H

mmH

llH

DESCRIPTION

FINE TUNING (RPN 01)

mm,ll: fine pitch offset in cents from A440

resolution is 100/8192 cents

range is 00,00 - 40,00 - 7FH,7FH

(-8192*100/8192 - 0 - +8191*100/8192 cent)

The FINE TUNING parameter (MIDI Registered Parameter Number 01) is used for fine tuning of the pitch of instruments

played on the specified MIDI channel. The FINE TUNING parameter provides high resolution control of tuning for pitch

changes of up to one semitone. The COARSE TUNING parameter (MIDI Registered Parameter Number 02) provides coarse

tuning in semitone units. See description of REGISTERED PARAMETER NUMBER (Controllers 100 and 101) and DATA

ENTRY (Controllers 6 and 38) Control Change messages.