Datum 'A' Area (3 places)

Datum 'E' Area (1 place)

DMD Mounting Area (4 places)

Connector Area

13

DLP2000

www.ti.com

DLPS140 – APRIL 2019

Product Folder Links: DLP2000

Submit Documentation Feedback

Copyright © 2019, Texas Instruments Incorporated

(1)

See Figure 8.

(2)

The structure and qualities of the border around the active array include a band of partially functional micromirrors called the “Pond of

Micromirrors” (POM). These micromirrors are structurally and/or electrically prevented from tilting toward the bright or “on” state but still

require an electrical bias to tilt toward “off.”

(3)

Out of the 8 POM rows on the top and bottom, only the 1 POM row closest to the active array is electrically attached to that reset group.

The other 7 POM rows are attached to a dedicated POM internal reset driver circuit.

Figure 7. System Interface Loads

6.9 Physical Characteristics of the Micromirror Array

PARAMETER

VALUE

UNIT

M

See Figure 8

640

micromirrors

N

See Figure 8

360

micromirrors

P

See Figure 8

7.56

µm

M × P

4.8384

mm

N × P

2.7216

mm

Pond of Micromirrors (POM)

8

micromirrors / side