RFbeam Microwave GmbH

RSP1 Radar Processor

Datasheet

14.2 Control Input Output

Please note: digital I/O are all 3.3V types.

14.2.1 Peripheral IO

All inputs are tied by a pull down resistor to ground.

All outputs switch to Vcc 3.3V.

Fig. 16: Stand alone configuration, control elements

Isolated output is preferable in order to prevent ground loops and noise injection.

Fig. 17: Example of isolated digital output

© RFbeam Microwave GmbH www.rfbeam.ch

December 11, 2015

24/25