A105

BPress fit Repair Tool

The following tools are used to repair the press fit connector housing and contact.

Part Number

Applicable Product

PCN11-*S-2.54PFB-2

PCN11-*S-2.54WB-2

PCN11-*S-HP

qTool to Remove Housing

This tool is used to remove the connector from the board.

*indicates the number of contacts.

Part Number

Applicable Product

PCN11-*S-2.54PFB-2

PCN11-*S-2.54WB-2

PCN11S-PFB-2-CP

PCN11S-WB-2-CP

qTool to Remove Contact

After the housing is removed from the board, this tool is used to remove every contact from the board.

*indicates the number of contacts.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.