A87

sProduct Specifications

s Material

qHousing, Contact Board and Key Header

100V DC

1000V AC/1 minute.

0.1A

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

96 hours at temperature of 40ç and humidity of 90% to 95%

500 cycles

Manual soldering: 300ç for 3 seconds

No flashover or insulation breakdown.

20m ohms max.

No electrical discontinuity of 10µs or more

Contact resistance : 20m ohms max.

No deformation of components affecting performance.

No damage, cracks, or parts looseness.

(-65ç : 30 minutes¡15 to 35ç: 5 minutes max.¡

125ç : 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles

1.Insulation Resistance

2.Withstanding Voltage

3.Contact Resistance

4.Vibration

5.Humidity (Steady state)

6.Temperature Cycle

7.Durability (Mating/un-mating)

8.Resistance to Solderingr heat

Item

Specification

Condition

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Rating

Current rating: 2A

Voltage rating: 300V AC

Operating Temperature Range: -30 to +85ç (Note 1)

Operating Humidity Range: 40 to 80%

Storage Temperature Range: -10 to +60ç (Note 2)

Operating Humidity Range: 40 to 70% (Note 2)

Parts

Material

Finish

Remarks

Contact

Insulator

Copper alloy

PBT

Contact area: Gold plated

Remainder: Gold plated

---------------

qReceptacle, Backplane Housing

Parts

Material

Finish

Remarks

Contact

Insulator

Copper alloy

PBT

Beige

PFB

Contact area: Gold plated

Remainder: Tin-lead plated

WB

Contact area: Gold plated

Remainder: Gold flash plated

Post area: Gold plated

---------------

UL94V-0

sOrdering Information

PCN11

A – * P – 2.54 H 2

q

e

wr

t

y u

qHousing

q Series name : PCN11

w Mounting hole type

Blank

: With Mounting hole

A

: Without mounting hole

e Number of contacts : 20, 32, 44, 50, 64, 90, 96, 100

r Opening type

P : Male connector

t Contact pitch : 2.54mm

y H : Housing

u Board thickness

2 : 2.4mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.