AD9548BCPZ datasheet(49/111 Pages) AD

49 / 111 page

Data Sheet

AD9548

Rev. G | Page 49 of 111

EXAMPLE

CONDITION 3 AND

CONDITION 13

ARE TAGGED

EEPROM

EEPROM CONTROLLER

UPLOAD

PROCEDURE

CONDITION

HANDLER

DOWNLOAD

PROCEDURE

CONDITION

TAG BOARD

IF B1 ≤ INSTRUCTION ≤ CF,

THEN TAG DECODED CONDITION

EXECUTE/SKIP

INSTRUCTION(S)

SCRATCH

PAD

COND ITION

CONDITION = 0E01, BITS[4:0]

ELSE

CONDITION = FncInit, BITS[7:3]

ENDIF

IF INSTRUCTION = B0,

THEN CLEAR ALL TAGS

FncInit, BITS[7:3]

0E01, BITS[4:0]

STORE CONDITION

INSTRUCTIONS AS

THEY ARE READ FROM

THE SCRATCH PAD.

WATCH FOR

OCCURRENCE OF

CONDITION

INSTRUCTIONS

DURING

DOWNLOAD.

IF {NO TAGS} OR {CONDITION = 0}

EXECUTE INSTRUCTIONS

ELSE

IF {CONDITION IS TAGGED}

EXECUTE INSTRUCTIONS

ELSE

SKIP INSTRUCTIONS

ENDIF

IF {0E01, BITS[4:0] ≠ 0}

Figure 52. EEPROM Conditional Processing

The condition is a 5-bit value with 32 possibilities. Condition = 0

is the null condition. When the null condition is in effect, the

EEPROM controller executes all instructions unconditionally.

The remaining 31 possibilities, condition = 1 through

condition = 31, modify the EEPROM controller’s handling of a

download sequence. The condition originates from one of two

sources (see Figure 52), as follows:



FncInit, Bits[7:3], which is the state of the M3 to M7

multifunction pins at power-up (see the Initial M0 to M7

Pin Programming section)



If Register 0x0E01, Bits[4:0] ≠ 0, then the condition is the value

stored in Register 0x0E01, Bits[4:0]; otherwise, the condition is

FncInit, Bits[7:3]. Note that a nonzero condition present in

Bits[7:3].

The condition tag board is a table that is maintained by the

EEPROM controller. When the controller encounters a condition

instruction, it decodes the 0xB1 through 0xCF instructions as

condition = 1 through condition = 31, respectively, and tags that

particular condition in the condition tag board. However, the 0xB0

condition instruction decodes as the null condition, for which the

controller clears the condition tag board, and subsequent download

instructions execute unconditionally (until the controller

encounters a new condition instruction).

During download, the EEPROM controller executes or skips

instructions depending on the value of condition and the

contents of the condition tag board. Note, however, that

condition instructions and the end instruction always execute

unconditionally during download. If condition = 0, then all

instructions during download execute unconditionally. If

condition ≠ 0 and there are any tagged conditions in the

condition tag board, then the controller executes instructions

only if the condition is tagged. If the condition is not tagged,

then the controller skips instructions until it encounters a

condition instruction that decodes as a tagged condition. Note

that the condition tag board allows for multiple conditions to be

tagged at any given moment. This conditional processing

mechanism enables the user to have one download instruction

sequence with many possible outcomes depending on the value

of the condition and the order in which the controller

encounters condition instructions.

AD9548BCPZ датащи(PDF) 49 Page - Analog Devices

AD9548BCPZ датащи(HTML) 49 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL