2

■Product Specifications

Ratings

Current rating: 0.2 A (Note 1)

Voltage rating: AC 30 Vrms

Operating temperature Range: –55 to

+85°C (Note 2)

Operating temperature Range: 90% or less

of relative humidity

(No dew condensation is allowed)

Storage temperature Range: -10 to +50°C

(Note 3)

Storage temperature Range: 90% or less

of relative humidity

(No dew condensation is allowed)

With specifications compatible with FPC contacts

t = 0.2 ± 0.03 gold plating

Items

Specifications

Conditions

1.Insulation Resistance

No less than 50 Mø

Measured at 100 V DC

2.Withstand Voltage

No flashover or breakdown

Conduct 90 V AC for one minute

3.Contact Resistance

100 mø MAX.

* Including FPC conductor resistance

AC 20 mV MAX (1 KHz), 1 mA

4.Mating Cycles

Contact resistance: no more than 100 mø

No breakage, cracks, or loosened parts

10 times

5.Vibration Resistance

No electric outage of 1 µs or greater

Contact resistance: no more than 100 mø

No breakage, cracks, or loosened parts

At the frequency of 10-55 Hz, half amplitude

0.75 mm, and 10 cycles in each of three axial

directions

6.Shock Resistance

No electric outage of 1 µs or greater

Contact resistance: no more than 100 mø

No breakage, cracks, or loosened parts

Acceleration: 981 m/s

2

Duration: 6 ms, sine half-wave, 3 cycles in each

of the 3 axis each in both directions

7.Humidity Resistance

(Steady State)

Contact resistance: no more than 100 mø

Insulation Resistance: 50 Mø or more

No breakage, cracks, or loosened parts

Left to stand for 96 hours at the temperature of

40°C and the humidity of 90% to 95%

8.Temperature Cycles

Contact resistance: no more than 100 mø

Insulation Resistance: 50 Mø or more

No breakage, cracks, or loosened parts

Temperature:-55➝ +15 to+35➝ +85➝ +15 to

+35°C

Time: 30➝ 2 to 3 ➝ 30➝ 2 to 3 minutes

5 cycles with the above conditions

9.Solder Heat

Resistance

No deformation in appearance or marked

instability of contacts

Reflow: According to the Recommended Temperature

Profile

Manual soldering: 350± 10°C for 5± 1 sec.

(Note 1) Use at 70% of the current rating when all pins are energized with the stated current rating.

(Note 2) Temperature rise at the time of electrification is included.

(Note 3) The term “storage” refers to the long-term storage condition of unused products before mounting on the PCB.

The operating temperature and humidity ranges apply to non-energized state after PCB mounting.

(Note 4) The above specifications are representative of this series. Please refer to “drawing for approval” for official individual

agreement.

■Materials

Part

Materials

Treatment

UL Regulation

Insulator

LCP

Gray

UL94V-0

Polyamide resin

Black

Contact

Phosphor bronze

Nickel barrier Gold plating

------

Metal fitting

Phosphor bronze

Pure tin reflow plating

■Product Number Structure

Refer to the chart below when searching for the part number nomenclature.

Please select connectors listed in this catalog when placing orders.

The characteristics and specifications of the products described in this catalog are for reference only.

Please make sure to check the latest delivery specifications before the time of purchase.

FH 35 C − 35S − 0.3 SHW (50)

❶❷

❸

❹

❺

❻

❼

SHW: SMT horizontal staggered array mount type

(50): standard product (5000 connectors per reel)

(99): 500 connectors per reel