1

0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector

FH35C Series

■Features

1.0.3 mm pitch, Dual-sided connector

This connector utilizes both a top and bottom contact

and provides design flexibility.

2.Improved FPC retention force achieved through the

use of our proprietary contact structure and a back

flip actuator.

FPC retention force (in the horizontal direction) is about 2.5

times greater than similar products produced by other

companies.

3.Supports high speed transmissions

By utilizing its excellent impedance characteristics, it is

capable of supporting high speed transmissions.

(Differential pairs of identical contacts allows for better

transmission characteristics and eDP (ver1.3) and

compatibility to MIPI(D−PHY) specifications.)

4.Delivered with actuator open

To reduce installation time and costs, the actuator is

delivered in the open position and eliminates the need to

open the actuator before FPC insertion.

5.Easy FPC Insertion

Equipped with tapered guides at the FPC insertions point,

they help to create a smoother FPC insertion operation.

6.Compatible with 0.2mm thick FPC

The FH35C was designed to be used with 0.2 mm FPC.

(Using the appropriate FPC will prevent deformation and

problems that may occur during the insertion and mating

processes.)

7.Bottom side protection

The bottom surface is over-molded and provides added

protection to the contacts (no exposure). This allows the

PCB space under the connector to be used for additional

patterning.

8.Halogen Free

Chlorine and bromine levels do not exceed the standard

values as defined by IEC 61249-2-21. (Br: 900 ppm or

less, Cl : 900 ppm or less, Br + Cl : 1,500 ppm or less)

9.Compatible with Automatic Mounting

Tape-and-reel packaging is available for use with pick-and-

place machines. Connectors are available on 5000 or 500

piece reels. (The outer diameter of an embossed reel is

Ø180mm

)

●3.2 mm in depth

FH35C Differential Impedance

130ps rise time (20-80%)

●At Time of FPC Insertion

●Lock Completion State

In cases where the application will demand a high level of reliability, such as automotive,

please contact a company representative for further information.

2013.11

②