OL2385SWUG datasheet(8/64 Pages) NXP

8 / 64 page

NXP Semiconductors

OL2385SWUG

SIGFOX software driver

OL2385SWUG

All information provided in this document is subject to legal disclaimers.

User guide

Rev. 2.1 — 6 April 2018

8 / 64

link between the development kit and a PC. It comes preloaded with microcode that

manages the interface between the PC and the OL2385 reference board. Users must

initially register their device with SIGFOX using a unique ID and access code provided

with the kit. Once the device has been registered, the kit can be used to connect to

the SIGFOX network and test the functionality of the OL2385-based application under

development.

To interact with the development kit, users must connect the kit to a PC through the

OpenSDA port on the FRDM-KL43Z. A terminal emulator, such as HyperTerminal,

provides the interface, allowing users to log in to the network and send and receive

messages. Designers can also use the Kinetis Design Studio (KDS) or MCUXpresso IDE

to develop and download microcode to the KL43Z.

5.2 Getting started

NXP's analog product development boards provide an easy-to-use platform for

evaluating NXP products. The boards support a range of analog, mixed-signal and power

solutions. They incorporate monolithic ICs and system-in-package devices that use

proven high-volume technology. NXP products offer longer battery life, a smaller form

factor, reduced component counts, lower cost and improved performance in powering

state-of-the-art systems.

The tool summary page for the OM2385/SF001 development kit is located at

www.nxp.com/OM2385. The

Overview tab provides an overview of the device, product

features, a description of the kit contents, a list of (and links to) supported devices, list of

(and links to) any related products and a Get Started section.

The

Get Started section provides links to everything needed to start using the device

and contains the most relevant, current information applicable to the FRDM-PF1550EVM.

• Go to www.nxp.com/OM2385

• On the Overview tab, locate the Jump To navigation feature on the left side of the

window.

• Select the Get Started link.

• Review each entry in the Get Started section and download an entry by clicking on the

title.

• After reviewing the Overview tab, visit the other product related tabs for additional

information:

– Documentation: download current documentation

– Software & Tools: download current hardware and software tools

– Buy/Parametrics: purchase the product and view the product parametrics

After downloading files, review each file, including the user guide which includes setup

instructions. If applicable, the bill of materials (BOM) and supporting schematics are also

available for download in the

Get Started section of the Overview tab.

5.2.1 Kit contents/packing list

The OM2385/SF001 development kit contents include:

• Assembled and tested OM2385/SF001 FRDM board mounted to a firmware-loaded

FRDM-KL43Z board

• Antenna with attached micro-FL connector

• Standard A (male) to mini B (male) USB cable

OL2385SWUG датащи(PDF) 8 Page - NXP Semiconductors

OL2385SWUG датащи(HTML) 8 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

датащи скачать

ссылки URL