VCKB1111CS-TR

Packaging specifications

This product is baked (moisture removal) before packaging, and is shipped in moisture-proof packaging (as shown

below) to minimize moisture absorption during transportation and storage. However, with regard to storing the

products, Stanley recommends the use of dry-box under the following conditions is recommended. Moisture-proof

bag as the packaging is made of anti-static material but packaging box is not.

The package should not be opened until immediately prior to its use, and please keep the time frame between

If the device needs to be soldered twice, both soldering operations must be completed within168h.

If any components should remain unused, please reseal the package and store them under the conditions described

in the 【 Recommended Storage Condition 】 above.

This product must be required to perform baking process (moisture removal) for

1.In the case of silica gel (blue) which indicates the moisture level within the package, changes or loses its

blue color.

2. In the case of time passes for 168h after the package is opened once.

Baking process should be performed after LED having been taken out of the package.

Baking may be performed in the tape-reel form , however if it is performed with the reel stacked over one another,

it may cause deformation of the reels and taping materials and later obstruct mounting. Please handle only once it

has returned to room temperature. Provided that, baking process shall be 2 times MAX.

【Time elapsed after package opening】

In the case of the package unopened , 6 months under 【 Recommended Storage Condition 】.

Please avoid rapid transition from low temp. condition to high temp. condition

and storage in corroding and dusty environment.

【Recommended storage condition / Products warranty period 】

Temperature

+5～30℃

Humidity

Under 70%

Page : 12

2017.9.14