For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7

7 - 6

Item

Description

J1 - J2

PCB Mount SMA RF Connector

J3 - J5

DC Pin

C1

10 pF Capacitor, 0402 Pkg.

C2, C3

1000 pF Capacitor, 0603 Pkg.

C4, C5

15000 pF Capacitor, 0603 Pkg.

L1

56nH Inductor, 0603 Pkg.

L2

18nH Inductor, 0603 Pkg.

R1

Resistor, 0402 Pkg.

U1

HMC382LP3 / HMC382LP3E Amplifier

112580 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

Evaluation PCB

The circuit board used in the application should use

RF circuit design techniques. Signal lines should

have 50 Ohm impedance while the package ground

leads and exposed ground paddle should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation circuit board shown is available from

Hittite upon request.

v01.0610

GaAs PHEMT MMIC

LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D