For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7

7 - 5

Pin Number

Function

Description

Interface Schematic

1, 4, 5, 7, 9,

12, 14, 16

N/C

No connection necessary. These pins may be connected to

RF/DC ground. Performance will not be affected.

2

RFIN

This pin is AC coupled and matched to 50 Ohms.

3, 6, 10

GND

These pins and package bottom must

be connected to RF/DC ground.

8Res

This pin is used to set the DC current of the amplifier

by selection of external bias resistor.

See application circuit.

11

RFOUT

This pin is AC coupled and matched to 50 Ohms.

13,15

Vdd2, Vdd1

Power supply voltage. Choke inductor and bypass

capacitors are required. See application circuit.

Pin Descriptions

Application Circuit

Note: L1, L2 and C1 should be located as close to pins as possible.

v01.0610

GaAs PHEMT MMIC

LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D