| поискавой системы для электроныых деталей |
|
PEF82913 датащи(PDF) 4 Page - Infineon Technologies AG |
|
|
|||||||||||||||||||||||||||||
PEF82913 датащи(HTML) 4 Page - Infineon Technologies AG |
|
4 / 240 page ![]() For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://www.infineon.com PEF 82912/82913 Revision History: March 2001 DS 1 Previous Version: Preliminary Data Sheet 10.00 Page Subjects (major changes since last revision) All Editorial changes, addition of notes for clarification etc. Table 1, Chapter 1.3 Introduced new version 82913 with extended performance of the U-interface Chapter 2.1.1.1 SCI: header description: added to sequences 43H, 41H and 49H: ’Generally, it can be used for any register access to the address range 20H-7DH.’ Chapter 2.3.2 IOM-2 handler: removed ’U-transceiver (U)’ from listing of functional units with programmable time slot and data port. Figure 12 Figure ’Data Access via CDAx0 and CDAx1 register pairs’ corrected: input swap has influence on the input enable (EN_I0,1), too Chapter 2.5.5.2 C/I commands: removed ’unconditional command’ from description C/I-command ’DR’ Chapter 2.5.5.3 LT-S state machine: C/I=command AIL removed (no valid input to the LT-S state machine) Chapter 4 Detailed register description: • U-transceiver Mode Evaluation Timing: clarified description • register ID: reset value of version 1.3 is 01H (not 00H) • CIX1.CODX1: bits 5-0 of C/I-channel 1 (not 7-2) • IOM_CR:TIC_DIS: added for clarification: ’This means that the timeslots TIC, A/ B, S/G and BAC are not available any more.’ Chapter 5.1 Refined references for ESD requirements:’ ...(CDM), EIA/JESD22-A114B (HBM) ---’ Chapter 5.2 Input/output leakage current set to 10µA (before: 1µA) Table 38 U-transceiver characteristics: enhanced S/N+D for 82913 and threshold level for 82912 and 82913 distinguished Chapter 5.1 Absolute Maximum Ratings: Maximum Voltage on VDD: 4.2V (before: 4.6V) Chapter 5.6.2 Chapter 5.6.3 AC-Timing SCI/parallel µC interface: enhanced timing specifications Chapter 5.6.3 Added restriction for control interval tRI Chapter 5.6.5 Parameters of the UVD/POR Circuit: defined reduced range of hysteresis: min. 30mV/max. 90mV relaxed upper limit of Detection Threshold to 2.92V (before: 2.9V) defined max. rising VDD for power-on Chapter 7.2.5 Register summary U-transceiver 4B3T: Reset value of MASKU is FFH (not 00H) Chapter 7.3 External circuitry for T-SMINT updated |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |