MP4570

3A, 4.5V-55V Input, Frequency Programmable,

Fully Integrated Synchronous, Step-Down Converter

MP4570 Rev. 1.01

www.MonolithicPower.com

1

1/4/2017

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2017 MPS. All Rights Reserved.

The Future of Analog IC Technology

DESCRIPTION

The MP4570 is a frequency programmable step-

down switching converter with integrated internal

high-side and low side power MOSFETs. It can

provide 3A continuous output current with peak

current control for excellent transient response

and efficiency performance.

The wide 4.5V to 55V input voltage range

accommodates

a

variety

of

step

down

applications, including those applications in

industrial, PoE, automotive and printer with DC

high voltage bus.

The MP4570 uses peak current mode control to

regulate the output voltage. The chip provides

over current protection with valley current

detection which is used to avoid current running

way. Also it has accurate and reliable over

voltage protection, and auto recovery thermal

protection. In addition, the optional external soft

start is available. Enable and power good

indication function can be used to power track

easily. In order to increase the efficiency,

MP4570 will automatically scaling down the

switching

frequency

when

load

is

light.

Meanwhile, the low side MOSFET will be turned

off to reduce driver loss when zero inductor

current is detected. MP4570 also features as a

fully integrated solution with both high side and

low side power MOSFETs. Synchronous

operation mode with integrated low side

MOSFET is much helpful to reduce the

conduction loss and also beneficial to reduce

external components space and save the cost.

The MP4570 is available in a TSSOP-20 EP with

exposed pad package.

FEATURES

 Wide Input Voltage Range: 4.5V to 55V

 90mΩ and 70mΩ Internal High and Low

Power MOSFETs

 Peak Current Mode Control

 Programmable Switching Frequency

 Stable Independent on Output Capacitors

 Optional External Soft Start

 OCP Protection with Valley Current

Detection

 Support External SYNC Clock

 OVP Protection

 Current Limit Decreasing during Output

Short for Better Thermal Performance

 Power Good Indication

 Thermal Shutdown Protection

 Available in a TSSOP-20 EP Package.

APPLICATIONS

 PoE Input Non-isolated Buck

 Industrial Power Systems

 Printers and Scanners

 Automotive Power Systems

 Distributed Power Systems

All MPS parts are lead-free, halogen free, and adhere to the RoHS

directive. For MPS green status, please visit MPS website under Quality

Assurance.

“MPS” and “The Future of Analog IC Technology” are Registered

Trademarks of Monolithic Power Systems, Inc.