| поискавой системы для электроныых деталей |
|
MCP73828 датащи(PDF) 1 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP73828 датащи(HTML) 1 Page - Microchip Technology |
|
1 / 24 page ![]() 2002 Microchip Technology Inc. DS21706A-page 1 M MCP73828 Features • Linear Charge Management Controller for Single Lithium-Ion Cells • High Accuracy Preset Voltage Regulation: +1% (max) • Two Preset Voltage Regulation Options: - 4.1V - MCP73828-4.1 - 4.2V - MCP73828-4.2 • Programmable Charge Current • Automatic Cell Preconditioning of Deeply Depleted Cells, Minimizing Heat Dissipation During Initial Charge Cycle • Charge Complete Output CD10 for LED or Microcontroller Interface • Continuous Temperature Monitoring • Automatic Power-Down when Input Power Removed • Temperature Range: -20°C to +85°C • Packaging: 8-Pin MSOP Applications • Single Cell Lithium-Ion Battery Chargers • Personal Data Assistants • Cellular Telephones • Hand Held Instruments • Cradle Chargers • Digital Cameras Typical Application Circuit Description The MCP73828 is a linear charge management con- troller for use in space-limited, cost sensitive applica- tions. The MCP73828 combines high accuracy constant voltage, controlled current regulation, cell pre- conditioning, cell temperature monitoring, and charge complete indication in a space saving 8-pin MSOP package. The MCP73828 provides a stand-alone charge management solution. The MCP73828 charges the battery in three phases: preconditioning, controlled current, and constant volt- age. If the battery voltage is below the internal low-volt- age threshold, the battery is preconditioned with a foldback current. The preconditioning phase protects the lithium-ion cell and minimizes heat dissipation. Following the preconditioning phase, the MCP73828 enters the controlled current phase. The MCP73828 allows for design flexibility with a programmable charge current set by an external sense resistor. The charge current is ramped up, based on the cell voltage, from the foldback current to the peak charge current estab- lished by the sense resistor. This phase is maintained until the battery reaches the charge-regulation voltage. Then, the MCP73828 enters the final phase, constant voltage. The accuracy of the voltage regulation is better than ±1% over the entire operating temperature range and supply voltage range. The MCP73828-4.1 is preset to a regulation voltage of 4.1V, while the MCP73828- 4.2 is preset to 4.2V. The charge complete output, CD10, indicates when the charge current has dimin- ished to approximately 10% of the peak charge current established by the sense resistor. The MCP73828 operates with an input voltage range from 4.5V to 5.5V. The MCP73828 is fully specified over the ambient temperature range of -20°C to +85°C. Package Type + - 12 5 7 8 MCP73828 6 3 4 Thermistor GND V DRV V SNS V IN V BAT SHDN 10 µF 100 k Ω 100 m Ω V IN Lithium-Ion Cell NDS8434 MA2Q705 5V 10 µF Single THERM CD10 332 Ω 500 mA Lithium-Ion Battery Charger MSOP V DRV V SNS V IN V BAT SHDN 1 2 3 4 8 7 MCP73828 5 6 THERM CD10 GND Single Cell Lithium-Ion Charge Management Controller with Charge Complete Indicator and Temperature Monitor |
Аналогичный номер детали - MCP73828 |
|
Аналогичное описание - MCP73828 |
|
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |