• Single 1.65 V – 1.95 V supply
• Serial Peripheral Interface (SPI) compatible
• Supports SPI Modes 0 and 3
• Supports RapidS™ operation
• Supports Dual-Input Program and Dual-Output Read
• Very high operating frequencies
• 100 MHz for RapidS
• 85 MHz for SPI
• Clock-to-output time (tV) of 5 ns maximum
• Flexible, optimized erase architecture for code + data storage applications
• Uniform 4-kB, 32-kB, and 64-kB Block Erase
• Full-Chip Erase
• Individual sector protection with Global Protect/Unprotect feature
• 16 sectors of 64 kB each
• Hardware controlled locking of protected sectors through WP pin
• Sector Lock-down with permanent freeze option
• Make any combination of 64 kB sectors permanently read-only
• 128-byte, One-Time Programmable (OTP) Security Register
• 64 bytes factory preprogrammed, 64 bytes user-programmable
• Flexible programming
• Byte/Page Program (1 to 256 bytes)
• Fast program and erase times
• 1.0 ms typical Page Program (256 bytes) time
• 50 ms typical 4-kB Block Erase time
• 250 ms typical 32-kB Block Erase time
• 550 ms typical 64-kB Block Erase time
• Program and Erase Suspend/Resume
• Automatic checking and reporting of erase/program failures
• Software controlled reset
• JEDEC Standard Manufacturer and Device ID Read Methodology
• Low power dissipation