15

TECHNICAL DATA SHEET

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: 75 Ohm Type F Test and Measurement Kit with SOLT Calibration Components, N Male to F

Male Armored Test Cables and Precision Accessories PE70MP5000

PE70MP5000

PE70MP5000 REV 1.0

75 Ohm Type F Test and Measurement Kit with

SOLT Calibration Components, N Male to F Male

Armored Test Cables and Precision Accessories

General Instructions and Usage Notes

# Notes

1 After use please place protective covers on both connectors and put back in kit box.

2 Keep connectors clean, and avoid touching the connectors.

3 Do not insert male pins with a diameter greater than 0.86 mm, this will damage the

female pin.

4 When Mating with RG6 Coax, please use a connector saver to prevent damage on the F

Female terminations.

5 Do not insert male pins that protrude more than 1mm over the outer flat of the

connector, this will damage the female connector.

6

When mating male and female connectors, rotate the hex only on the male connector

(keep the male body in a fixed position) slowly to screw on the female connector thread

(keep female body in a fixed position).

7 When de-mating, always ensure that the interconnected components remain in a fixed

position while rotating only the coupling nut slowly to de-mate the connectors.

8

Visually inspect the connector threads prior to use. If needed, clean the center

conductor pin and outer conductor with alcohol to remove any debris that may be

present. Be sure to apply the alcohol in a circular motion with a lint-free cloth or

applicator.

9 Torque the F Type male connectors to 15 in-lbs.

10 Use at room temperature.