1

www.oring-networking.com

1-330

IGPS-9084GP

▪

Support O-Ring (recovery time < 30ms over 250 units of connection) and

MSTP(RSTP/STP compatible) for Ethernet Redundancy

▪

Open-Ring support the other vendor's ring technology in open architecture

▪

O-Chain allow multiple redundant network rings

▪

function

▪

8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts

per port

▪

Support PoE scheduled configuration and PoE auto-ping check function

▪

Support IEEE 1588v2 clock synchronization

▪

Support IPV6 new internet protocol version

▪

Support Modbus TCP protocol

▪

Support IEEE 802.3az Energy-Efficient Ethernet technology

▪

Provided HTTPS/SSH protocol to enhance network security

▪

Support SMTP client

▪

Support IP-based bandwidth management

▪

Support application-based QoS management

▪

Support Device Binding security function

▪

Support DOS/DDOS auto prevention

▪

IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic

▪

Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management

▪

Support ACL, TACACS+ and 802.1x User Authentication for security

▪

Supports 9.6K Bytes Jumbo Frame

▪

Multiple notification for warning of unexpected event

▪

Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision)

configuration

▪

Support LLDP Protocol

▪

Rigid IP-30 housing design

▪

DIN-Rail and wall mounting enabled

IGPS-9084GP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch

support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-

critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP also support Power over Ethernet, a

system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9084GP

switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE

connection. And support wide operating temperature from -40 to 75°C. IGPS-9084GP can also be managed centralized and convenient by Open-Vision, Except

the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet

application.

Introduction

Features

O-Ring

Industrial Ethernet Switch DIN-Rail Managed Gigabit PoE Ethernet Switch

P.S.E

Full Gigabit

v1.0a / Feb, 2013

▪

O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring

redundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover

technology.

IGPS-9084GP

Industrial 12-port managed Gigabit PoE Ethernet switch with

8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X, SFP

socket

*NOTE: This function is available by request only