P89LPC925FDH datasheet(36/49 Pages) PHILIPS

36 / 49 page

Philips Semiconductors

P89LPC924/925

8-bit microcontrollers with accelerated two-clock 80C51 core

Product data

Rev. 03 — 15 December 2004

36 of 49

9397 750 14471

8.25 Flash program memory

8.25.1

General description

The P89LPC924/925 Flash memory provides in-circuit electrical erasure and

programming. The Flash can be read, erased, or written as bytes. The Sector and

Page Erase functions can erase any Flash sector (1 kB) or page (64 bytes). The Chip

Erase operation will erase the entire program memory. In-System Programming and

standard parallel programming are both available. On-chip erase and write timing

generation contribute to a user-friendly programming interface. The P89LPC924/925

Flash reliably stores memory contents even after 100,000 erase and program cycles.

The cell is designed to optimize the erase and programming mechanisms. The

P89LPC924/925 uses VDD as the supply voltage to perform the Program/Erase

algorithms.

8.25.2

Features

• Parallel programming with industry-standard commercial programmers.

• In-Circuit serial Programming (ICP) with industry-standard commercial

programmers.

• IAP-Lite allows individual and multiple bytes of code memory to be used for data

storage and programmed under control of the end application.

• Internal ﬁxed boot ROM, containing low-level In-Application Programming (IAP)

routines that can be called from the end application (in addition to IAP-Lite).

• Default serial loader providing In-System Programming (ISP) via the serial port,

located in upper end of user program memory.

• Boot vector allows user-provided Flash loader code to reside anywhere in the

Flash memory space, providing ﬂexibility to the user.

• Programming and erase over the full operating voltage range.

• Read/Programming/Erase using ISP/IAP/IAP-Lite.

• Any ﬂash program operation in 2 ms.

• Any ﬂash erase operation in 4 ms.

• Programmable security for the code in the Flash for each sector.

• >100,000 typical erase/program cycles for each byte.

• 10 year minimum data retention.

8.25.3

ISP and IAP capabilities of the P89LPC924/925

Flash organization: The P89LPC924/925 program memory consists of four/eight

1 kB sectors. Each sector can be further divided into 64-byte pages. In addition to

sector erase, page erase, and byte erase, a 64-byte page register is included which

allows from 1 to 64 bytes of a given page to be programmed at the same time,

substantially reducing overall programming time. An In-Application Programming

(IAP) interface is provided to allow the end user’s application to erase and reprogram

the user code memory. In addition, erasing and reprogramming of

user-programmable bytes including UCFG1, the Boot Status Byte and the Boot

Vector are supported. As shipped from the factory, the upper 512 bytes of user code

space contains a serial In-System Programming (ISP) routine allowing for the device

to be programmed in circuit through the serial port.

P89LPC925FDH датащи(PDF) 36 Page - NXP Semiconductors

P89LPC925FDH датащи(HTML) 36 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

датащи скачать

ссылки URL