iC-LSHC

3-CHANNEL SIN/COS PHOTOSENSOR ARRAY

Rev D1, Page 8/9

DESIGN REVIEW: Notes On Chip Functions

iC-LSHC 2

No.

Function, Parameter/Code

Description and Application Hints

1

Please refer to former datasheet release B1.

Table 4: Notes on chip functions regarding iC-LSHC chip release 2.

iC-LSHC Z

No.

Function, Parameter/Code

Description and Application Hints

1

No further notes at time of printing.

Table 5: Notes on chip functions regarding iC-LSHC chip release Z.

REVISION HISTORY

Rel.

Chapter

Modification

Page

D1

2017-08-03 FEATURES

Preliminary label removed

Supply voltage extended to include 4.1 V

Operational temperature up to 125 °C

1

PACKAGING INFORMATION

oQFN with top marking, revision of footnote, update of oQFN package drawing

3, 4

THERMAL DATA

Operating temperature up to 125 °C for oQFN

5

ELECTRICAL

CHARACTERISTICS

Operating conditions: VCC supply voltage extended to include 4.1 V

Item 001: min. limit; item 101, condition: reference to λpk

Item 104: 460 nm supplemented

Items 301, 303: conditions and limits (4.1 V added)

Item 302: new item

Item 304: removed

Item 401: min. limit, item 403: max. limit

6

APPLICATION CIRCUITS

Fig. 1 updated

7

iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to the

relevant current specifications on our internet website www.ichaus.com/infoletter and is automatically generated and shall be sent to registered users by email.

Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.

The data specified is intended solely for the purpose of product description and shall represent the usual quality of the product. In case the specifications contain

obvious mistakes e.g. in writing or calculation, iC-Haus reserves the right to correct the specification and no liability arises insofar that the specification was from

a third party view obviously not reliable. There shall be no claims based on defects as to quality in cases of insignificant deviations from the specifications or in

case of only minor impairment of usability.

No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunder

with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In

particular, this also applies to the stated possible applications or areas of applications of the product.

iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be

expected to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications

include, without limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or

environments or in automotive applications unless specifically designated for such use by iC-Haus.

iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade

mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.

Software and its documentation is provided by iC-Haus GmbH or contributors "AS IS" and is subject to the ZVEI General Conditions for the Supply of Products

and Services with iC-Haus amendments and the ZVEI Software clause with iC-Haus amendments (www.ichaus.com/EULA).