Automotive Sensor Signal

Conditioner with Dual Analog Output

ZSSC3154

Datasheet

© 2016 Integrated Device Technology, Inc.

2

January 22, 2016

ZSSC3154 Block Diagram

Analog Front-End AFE

Digital Core

Interfaces

External

Temperature

Sensor 1

Sensor

Bridge

Temperature

Sensor Select

Gain

Factor

Offset

Shift

ADC

Mode

Conditioning Coefficients

Conditioning Calculation

Conditioning Formula

I

AOUT1

Internal

Temperature

Sensor

MUX

PGA

ADC

EEPROM

CMC

ROM

I

DAC

ZACwire™

BAMP

BAMP

AOUT2

OWI

(Digital

Data IO)

External

Temperature

Sensor 2

Diagnostic Fault

Band Mode

RAM

* I

Ordering Information

Product Sales Code

Description

Package

ZSSC3154BA1B

ZSSC3154 Die – Temperature Range -40 to 125°C

Wafer

ZSSC3154BA1C

ZSSC3154 Die – Temperature Range -40 to 125°C

Sawn on frame

ZSSC3154BA3R

ZSSC3154 QFN32 (5x5 mm; wettable flank) – Temperature Range -40 to 125 °C

Reel

ZSSC3154BE3R

ZSSC3154 QFN32 (5x5 mm; wettable flank) – Temperature Range -40 to 150 °C

Reel

ZSSC3154KIT

ZSSC3154 SSC Evaluation Kit: Communication Board, SSC Board, Sensor

Replacement Board, 5 QFN32 samples (software can be downloaded from the

product page www.IDT.com/ZSSC3154)

Kit

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance

specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an

implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property

rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated

Device Technology, Inc. All rights reserved.