PI5V332 datasheet(4/7 Pages) PERICOM

4 / 7 page

PS8118B

09/22/04

PI5V332

Low On-Resistance Wideband/Video

Quad with Individual Control

Definitions

Symbol

Description

RON

Resistance between source and drain with switch in the ON state.

Output leakage current measured at S1, S2, and D with the switch OFF.

VIN

Digital voltage at the IN pin that selects between S1 and S2 analog inputs.

VEN

A voltage that ENABLES the chip.

CIN

Capacitance at the digital inputs.

COFF

Capacitance at analog I/O (S1, S2, D) with switch OFF.

CON

Capacitance at analog I/O (S1, S2, D) with switch ON.

VIH

Minimum input voltage for logic HIGH.

VIL

Minimum input voltage for logic LOW.

IIH (IIL)

Input current of the digital input.

IOS

Minimum short circuit current for S1, S2 and D.

tON

Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is

turned ON. The peak analog voltage is 0.714V.

tOFF

Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is

turned OFF. The peak analog voltage is 0.714V.

Frequency response of the switch in the ON state measured at 3dB down.

XTALK

Is an unwanted signal coupled from channel to channel. Measured in –dB. XTALK = 20 LOG VOUT/VIN.

This is non-adjacent crosstalk.

Differential gain is the difference measurement between two bias levels, for instance analog input signals of

0V to 0.714V.

Differential phase is the difference measurement between two bias levels, for instance analog input signals

of 0V to 0.714V.

OIRR

Off isolation is the resistance (measured in –dB) between the input and output with the switch off (NO).

PI5V332 датащи(PDF) 4 Page - Pericom Semiconductor Corporation

PI5V332 датащи(HTML) 4 Page - Pericom Semiconductor Corporation

Html Pages

1 2 3 4 5 6 7

датащи скачать

ссылки URL