deTec4 Core Set 30/900 | deTec4 Core

SAFETY LIGHT CURTAINS

Connection diagram

deTec4 Core safety light curtain connected to UE48-2OS safety relay

S34

S21

S35

S22

S33

S12

S11

S31

14

A2

24

32

13

A1

23

31

UE48-2OS2D2

K1

K2

S1

k1

k2

OSSD1

OSSD2

n.c.

GND

+24V

1

2

3

4

5

+24V

n.c.

GND

n.c.

n.c.

1

2

3

4

5

24 V DC

0 V DC

E114585/01/2014-05-08

Task

Connection of a deTec4 Core safety light curtain to UE48-2OS.

Operating mode: with restart interlock and external device monitoring.

Function

When the light path is clear, the OSSD1 and OSSD2 outputs are live. The system is ready to switch on if K1 and K2 are de-ener-

gized. By pressing S1 (button is pressed and released), the UE48-2OS is energized and its 13 - 14 and 23 - 24 contacts activate K1

and K2. On interruption of one of the light beams, the UE48-2OS is de-energized by the OSSD1 and OSSD2 outputs and K1 and K2

are deactivated.

Fault analysis

OSSD cross-circuits and short-circuits are detected and lead to the inhibited state (lock-out). The incorrect functioning of one of the

K1 or K2 contactors will be detected and does not result in the loss of the shutdown function. Jamming of the S1 button will pre-

vent the UE48-2OS from enabling.

Comments

is disabled. For categories 4 and 3, the integration must be dual-channel (x/y paths). Single-channel integration in the control (z

path) is only possible with a single-channel control and by taking the risk analysis into account.

2017-08-21 16:38:06 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK

5