Approvals and Compliance

Parameter

Standards

EMI

EN55015

EMS

EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, , EN61000-4-4, , EN61000-4-5, EN61000-4-6,

EN61000-4-8, EN61000-4-11, EN61547

Safety UL/c-UL, CE

(Pending) UL8750 Compliant to UL1310 ClaST 2, UL1012, UL935, CSA-C22.2 No. 0, CSA-C22.2 No. 107.1,

CSA-C22.2 No.250.0, EN61347-1,EN61347-2-13

Waterproof

IP66 Rating

Mechanical

Parameter

Specification

Dimension,

78x80x25mm (3.07x3.15x0.98 inches)

Net Weight

200g

Dimming Control

Parameter

Min.

Typ.

Max.

Unit

10V Output Voltage

9.8

10V

10.2

VDC

10V Output Source Current

-10

-

2

mA

Absolute Max. Voltage on the 1~10V Input Pin

-2

-

15

VDC

Source Current on 0-10V Input Pin

0

-

1

mA

The dimmer control may be operated from either a potentiometer or from an input signal of 0 – 10 Vdc. Two recommended implementations are provided

above

Notes:

1.

For the driver to operate properly, the load voltage must be maintained above the minimum voltage threshold (approx. 33% of t he max. output

voltage for any given model).

2.

If the output voltage is maintained above 50% of the maximum output voltage, the dimmer control may be operated over the entire 0-10V

range with output current varying from 100% down to practically 0%.

3.

If the output voltage is maintained between 33-50% of the maximum output voltage, the dimmer control may be operated over 5-10V range

with output current