Catalog Symbol: HPS2

Description: Meets requirement of UL 1598 that both poles be

removed simultaneously.

Fuse Type: 13/32” x 1-1/2”

Agency Information: UL 512 Recognized,

(Guide IZLT2, File E14853)

CSA Certified: (Class 6225-01, File 47235)

Flammability Rating: 94V-0

Terminals: 1/4” quick connect / solder

Electrical Rating: 30A @ 600V (20A max when used

with quick connect terminals.)

Two Pole Panel-Mount Fuseholder

HPS2

For ⁄‹Ω£™∑ ≈ 1⁄Ω™∑ Fuses

Series

Form No. HPS2 Series

Page 1 of 1

Data Sheet: 2140

Dimensional Data

Panel Mount Dimensions

Catalog Symbol

HPS2

standard 10-in carton

BK/HPS2

bulk 100-in carton

Maximum panel thickness, mounting flange in front of panel

Assumes Pollution Degree 3 per UL 840:

Conductive pollution, or dry, nonconductive pollution that

becomes conductive due to condensation that is expected.

Maximum panel thickness

not including any sealing gaskets.

System Voltage

600V

480

277

240

120

Fuseholder

mm Inches mm Inches mm Inches mm Inches mm Inches

HPS2

1.50 1/32” 2.39 3/32” 6.66 1/4”

7.21 9/32” 8.69

5/8”

Thicker panels may be used if fuse holder load terminal is fully insulated, using a

UL recognized (VW-1) insulative heat-shrink tubing, or if anticipated environment

is of Pollution Degree 1 or 2, or if panel is nonconductive.

Pollution Degree 2- Normally, only nonconductive pollution. However, a temporary

conductivity caused by condensation may be expected.

Pollution Degree 1- No pollution or only dry, nonconductive pollution.

The pollution has no influence.

Maximum panel thickness, mounting flange behind the panel:

5.08mm/0.200” (flush to knob collar)

8-28-02

SB02067

The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is

intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change

design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-

tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

•

When insulated terminals are required,

1-1/4” diameter shrink wrap to be used

•

No tension on line (rear) terminal

allowed

•

90º clockwise rotation to lock fuse

carrier in body