R5F51101ADNF datasheet(49/108 Pages) RENESAS

49 / 108 page

R01DS0202EJ0120 Rev.1.20

Page 49 of 108

Jul 29, 2016

RX110 Group

5. Electrical Characteristics

Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when internal pull-up

MOSs are in the off state.

Note 2. Clock supply to the peripheral functions is stopped. The clock source is HOCO. FCLK and PCLK are set to divided by 64.

Note 3. Clocks are supplied to the peripheral functions. The clock source is HOCO. FCLK and PCLK are set to the same frequency as

ICLK.

Note 4. Values when VCC = 3.3 V.

Note 5. Clock supply to the peripheral functions is stopped. The clock source is the main oscillation circuit when ICLK = 12 MHz and

HOCO when ICLK = 8 or 1 MHz. FCLK and PCLK are set to divided by 64.

Note 6. Clocks are supplied to the peripheral functions. The clock source is the main oscillation circuit when ICLK = 12 MHz and HOCO

when ICLK = 8 or 1 MHz. FCLK and PCLK are set to the same frequency as ICLK.

Note 7. Clock supply to the peripheral functions is stopped. The clock source is the sub-clock oscillator. FCLK and PCLK are set to

divided by 64.

Note 8. Clocks are supplied to the peripheral functions. The clock source is the sub-clock oscillator. FCLK and PCLK are set to the

same frequency as ICLK.

Note 9. Values when the MSTPCRA.MSTPA17 bit (12-bit A/D converter module stop bit) is set to “transition to the module stop state is

made”.

Figure 5.1

Voltage Dependency in High-Speed Operating Mode (Reference Data)

Supply

current*1

Low-speed

operating mode

Normal

operating

mode

No peripheral operation*7

ICLK = 32.768 kHz

ICC

3.9

—

μA

All peripheral operation:

Normal*8, *9

ICLK = 32.768 kHz

10.4

—

All peripheral operation:

Max.*8, *9

ICLK = 32.768 kHz

—

Sleep mode

No peripheral operation*7

ICLK = 32.768 kHz

2.1

—

All peripheral operation:

Normal*8

ICLK = 32.768 kHz

5.6

—

Deep sleep

mode

No peripheral operation*7

ICLK = 32.768 kHz

1.7

—

All peripheral operation:

Normal*8

ICLK = 32.768 kHz

3.9

—

Table 5.7

DC Characteristics (5) (2/2)

Conditions:

1.8 V

≤ VCC ≤ 3.6 V, 1.8 V ≤ AVCC0 ≤ 3.6 V, VSS = AVSS0 = 0 V, T

a = –40 to +105°C

Item

Symbol

Typ

Max

Unit

Test

Conditions

1.5

2.0

2.5

3.0

3.5

4.0

VCC (V)

Ta = 85/105°C, ICLK = 32 MHz

Note 1. All peripheral operation is normal. Average value of the tested middle samples during product evaluation.

Note 2. All peripheral operation is maximum. Average value of the tested upper-limit samples during product

evaluation.

Ta = 25°C, ICLK = 32 MHz

Ta = 85/105°C, ICLK = 16 MHz

Ta = 85/105°C, ICLK = 8 MHz

Ta = 25°C, ICLK = 16 MHz

Ta = 25°C, ICLK = 8 MHz

R5F51101ADNF датащи(PDF) 49 Page - Renesas Technology Corp

R5F51101ADNF датащи(HTML) 49 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL