 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
LT1797CS5 датащи(PDF) 3 Page - Linear Technology |
|
|
|||||||||||||||||||||||||||||
LT1797CS5 датащи(HTML) 3 Page - Linear Technology |
|
|
3 / 12 page  3 LT1797 SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS PSRR Power Supply Rejection Ratio VS = 2.7V to 12V, VCM = VO= 1V q 80 90 dB Minimum Supply Voltage q 2.5 2.7 V VOL Output Voltage Swing LOW No Load, Input Overdrive = 30mV q 815 mV ISINK = 5mA q 80 160 mV ISINK = 10mA q 150 250 mV VOH Output Voltage Swing HIGH No Load, Input Overdrive = 30mV q VS – 0.14 VS – 0.05 V ISOURCE = 5mA q VS – 0.30 VS – 0.2 V ISOURCE = 10mA q VS – 0.39 VS – 0.3 V ISC Short-Circuit Current VS = 5V 25 45 mA VS = 3V 15 25 mA IS Supply Current 1.1 1.5 mA q 2.0 mA GBW Gain Bandwidth Product (Note 5) f = 100kHz 6.0 10 MHz 0 °C ≤ TA ≤ 70°C q 5.0 MHz –40 °C ≤ TA ≤ 85°C q 4.5 MHz SR Slew Rate (Note 5) AV = –1 1.3 2.25 V/ µs 0 °C ≤ TA ≤ 70°C q 1.1 V/ µs –40 °C ≤ TA ≤ 85°C q 1.0 V/ µs tr Output Rise Time 10% to 90%, 0.1V Step, RL = 10k 55 ns tf Output Fall Time 10% to 90%, 0.1V Step, RL = 10k 55 ns tS Settling Time VS = 5V, ∆VOUT = 2V to 0.1%, AV = –1 1.6 µs THD Distortion VS = 3V, VOUT = 1.8VP-P, AV = 1, RL = 10k, f = 1kHz 0.001 % FPBW Full-Power Bandwidth (Note 6) VOUT = 2VP-P 360 kHz The q denotes specifications which apply over the specified temperature range, otherwise specifications are TA = 25°C. VS = 3V, 0V; VS = 5V, 0V, VCM = VOUT = half supply, pulse power tested, unless otherwise specified. (Note 3) The q denotes specifications which apply over the specified temperature range, otherwise specifications are TA = 25°C. VS = ±5V, VCM = 0V, VOUT = 0V, pulse power tested unless otherwise specified. (Note 3) SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS VOS Input Offset Voltage 1 1.5 mV 0 °C ≤ TA ≤ 70°C q 2.5 mV –40 °C ≤ TA ≤ 85°C q 3.0 mV Input Offset Voltage Drift (Note 4) q 520 µV/°C IB Input Bias Current VCM = V – q –300 –150 nA VCM = V + q 50 100 nA Input Bias Current Drift q 0.1 nA/ °C IOS Input Offset Current VCM = V – q 10 25 nA VCM = V + q 10 25 nA Input Noise Voltage 0.1Hz to 10Hz 1 µVP-P en Input Noise Voltage Density f = 10kHz 20 nV/ √Hz in Input Noise Current Density f = 10kHz 0.23 pA/ √Hz f = 10kHz, VCM = 4.7V 0.15 pA/ √Hz RIN Input Resistance Differential 200 330 k Ω Common Mode, VCM = – 5V to 3.8V 100 M Ω CIN Input Capacitance 4pF Input Voltage Range q –5 5 V ELECTRICAL CHARACTERISTICS |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
