| поискавой системы для электроныых деталей |
|
STM32F779IGH7 датащи(PDF) 165 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F779IGH7 датащи(HTML) 165 Page - STMicroelectronics |
|
165 / 255 page ![]() DocID028294 Rev 4 165/255 STM32F777xx STM32F778Ax STM32F779xx Electrical characteristics 224 Input/output AC characteristics The definition and values of input/output AC characteristics are given in Figure 39 and Table 67, respectively. Table 66. Output voltage characteristics Symbol Parameter Conditions Min Max Unit VOL(1) 1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 15. and the sum of IIO (I/O ports and control pins) must not exceed IVSS. Output low level voltage for an I/O pin CMOS port(2) IIO = +8 mA 2.7 V ≤ VDD ≤ 3.6 V 2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52. - 0.4 V VOH(3) 3. The IIO current sourced by the device must always respect the absolute maximum rating specified in Table 15 and the sum of IIO (I/O ports and control pins) must not exceed IVDD. Output high level voltage for an I/O pin except PC14 CMOS port(2) IIO = -8 mA 2.7 V ≤ VDD ≤ 3.6 V VDD 0.4 - VOH(3) Output high level voltage for PC14 CMOS port(2) IIO = -2 mA 2.7 V ≤ VDD ≤ 3.6 V VDD 0.4 VOL (1) Output low level voltage for an I/O pin TTL port(2) IIO =+8mA 2.7 V ≤ VDD ≤ 3.6 V - 0.4 V VOH (3) Output high level voltage for an I/O pin except PC14 TTL port(2) IIO =-8mA 2.7 V ≤ VDD ≤ 3.6 V 2.4 - VOL(1) Output low level voltage for an I/O pin IIO = +20 mA 2.7 V ≤ VDD ≤ 3.6 V - 1.3(4) 4. Based on characterization data. V VOH(3) Output high level voltage for an I/O pin except PC14 IIO = -20 mA 2.7 V ≤ VDD ≤ 3.6 V VDD 1.3(4) - VOL(1) Output low level voltage for an I/O pin IIO = +6 mA 1.8 V ≤ VDD ≤ 3.6 V - 0.4(4) V VOH(3) Output high level voltage for an I/O pin except PC14 IIO = -6 mA 1.8 V ≤ VDD ≤ 3.6 V VDD 0.4(4) - VOL(1) Output low level voltage for an I/O pin IIO = +4 mA 1.7 V ≤ VDD ≤ 3.6V - 0.4(5) 5. Guaranteed by design. V VOH(3) Output high level voltage for an I/O pin except PC14 IIO = -4 mA 1.7 V ≤ VDD ≤ 3.6V VDD 0.4(5) - VOH(3) Output high level voltage for PC14 IIO = -1 mA 1.7 V ≤ VDD ≤ 3.6V VDD 0.4(5) - |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |