| поискавой системы для электроныых деталей |
|
STM32L062K8 датащи(PDF) 116 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32L062K8 датащи(HTML) 116 Page - STMicroelectronics |
|
116 / 118 page ![]() Revision history STM32L062x8 116/118 DocID025937 Rev 8 26-Oct-2015 5 Added LQFP32 package. Removed SPI2, I2S, I2C2, LPUART and VDD_USB in the whole document. Changed number of ADC channels to 10. Corrected number of GPIOs in Table 1: Ultra-low-power STM32L062x8 device features and peripheral counts. Updated current consumption in Run mode in Section : Features. Removed GPIOD and H from Figure 1: STM32L062x8 block diagram. Updated Table 8: Capacitive sensing GPIOs available on STM32L062x8 devices. Updated Figure 5: STM32L062x8 UFQFPN32 pinout. Renamed BOOT1 into nBOOT1. Changed USARTx_RTS into USARTx_RTS_DE. ADC no more available in Low-power run and Low-power Sleep modes in Table 4: Functionalities depending on the working mode (from Run/active down to standby). Added I2C alternate functions on PB6/7 in Table 17: Alternate functions for port B. In whole Section 6: Electrical characteristics, modified notes related to characteristics guaranteed by design and by tests during characterization. Updated Table 18: Voltage characteristics. Updated ΣIIO(PIN) in Table 19: Current characteristics. UpdatedFigure 13: IDD vs VDD, at TA= 25/55/ 85/105/125 °C, Low- power run mode, code running from RAM, Range 3, MSI (Range 0) at 64 KHz, 0 WS , Figure 14: IDD vs VDD, at TA= 25/55/ 85/105/125 °C, Stop mode with RTC enabled and running on LSE Low drive and Figure 15: IDD vs VDD, at TA= 25/55/85/105/125 °C, Stop mode with RTC disabled, all clocks OFF. Changed temperature condition in Table 7: Internal voltage reference measured values and Table 23: Embedded internal reference voltage calibration values. Updated TCoeff in Table 24: Embedded internal reference voltage. Added note 1 in Table 34: Peripheral current consumption in Stop and Standby mode. Updated Table 35: Low-power mode wakeup timings. Added MSI oscillator temperature frequency drift in Table 41: MSI oscillator characteristics. Updated Table 46: EMS characteristics and Table 47: EMI characteristics. Updated Table 55: ADC characteristics. Section : I2C interface characteristics: updated introduction, Table 64: I2C analog filter characteristics. Updated Figure 28: SPI timing diagram - slave mode and CPHA = 0. Updated note below Figure 38: LQFP32 marking example (package top view) and Figure 41: UFQFPN32 marking example (package top view). Updated Ilkg in Table 50: I/O current injection susceptibility and Table 51: I/O static characteristics. Table 80. Document revision history (continued) Date Revision Changes |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |