l

Despite being a 90 mm wide slim

chassis, it provides high

performance of the workstation.

With slim stabilizers, you can

make the best use of the space at

the sides of the chassis, such as

for a bookend.

l

Riser type PCI slot adopted. In addition to

the standard equipment PCI Express

(x16)/(x4) riser card for installing a

graphics card, the optional PCI Express

(x4)/PCI (32bit/33MHz) riser card is also

selectable.

© Copyright 2012 NEC Corporation. The information and

specification contained in this publication are subject to

modification without prior notice. Microsoft and Windows

Server are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other

countries. Intel, the Intel logo, Pentium, Pentium Inside, Xeon,

and Xeon Inside are trademarks of Intel Corporation in the U.S.

and/or other countries. All other names of products and brands

cited are the property of their respective owners. NEC is not

responsible for photographic or typing errors.

NEC EXPRESS5800/53Xi

HARDWARE SPECIFICATION

NEC Corporation

7-1, Shiba 5-chome, Minato-ku, Tokyo,

108-8001, Japan

www.nec.com/express

accelerator installable

l

For a workstation of this class,

installed to the slim chassis. 53Xi is

suitable not only for CAD as well as

for terminals in industries such as

financial and medicine.

Model number

Processor

Chipset

Type

Mountable memory

Maximum size

Error detection/correction

Number of slots

Mountable HDD

Maximum size

Maximum mountable number

Controller

Internal graphics

Chip type

Mountable graphics card

Network function

Serial

Display

LAN

Internal 3.5 inch bay [Open]

5.25 inch bay [Open]

Riser card

Standard

Option (N8006-1011)

PCI Express (x16) [Open]

PCI Express (x4) [Open]

1 slot [1] (Mechanically x8, Short size)

PCI Express 2.0 supported

－

32 bit PCI slot [Open]

－

1 slot [1] (33MHz/5V, Short size)

Power consumption

*1 There are some functional limitations for Windows® 8 Pro 64 bit model. (RAID function not supported, some option boards not supported (LAN board))

*3 Not all the peripherals are guaranteed to run properly.

*5 Power consumption of the server in the maximum configuration is measured.

*6 When the server is stored at low or high temperature, the system clock may run significantly faster or slower. Use of a time server (NTP server) is recommended if high

accuracy is required in the system clock.

*7 When installing Windows 7 Professional manually in the onboard RAID configuration or optional RAID configuration, prepare your USB memory or choose Flash FDD

[N8160-86].

*2 When 4GB memory is installed in Windows 7 Professional, usable memory is approximately 3GB.

*4 The depth of the mountable board is either within 312 mm (long size), 350 mm with the retainer, 173 mm (short size), or 167.6 mm (MD2). Also, the width of the

mountable board is either within 111 mm (with no "Low-Profile" indication) or within 64 mm (with "Low-Profile" indication).

EXPRESSBUILDER, NEC ESMPRO Manager, NEC ESMPRO Agent

Memory

Internal HDD/SSD

Interface

Expansion bay

Headphone terminal×1 (Front), microphone terminal (Stereo)×2 (Front:1, Rear:1),

Line-out (Dual-used for headphone)×1 (Rear), Line-in×1 (Rear)

2 slots [1]

1 slot (Flat type) [0]

SATA HDD: 4TB

2

SATA III/600

Intel® HD Graphics P4600 (Built-in in CPU)

NVIDIA Quadro® K600 / NVIDIA Quadro® K2000 / NVIDIA Quadro® K4000

4GB / 8GB

ECC

4 slots

Dimension (W x D x H)

Weight (Maximum)

Power

Supported OS

Attached software

Approx. 9.2 kg

AC100/200V ±10%, 50/60Hz±3Hz

250VA/244W

　

　

In operation: 10 - 35°C / 10 - 80% (No condensation)

In storage: -10 - 55°C / 10 - 80% (No condensation)

1 slot [1] (Short size) PCI Express 3.0 supported

90×373×336 mm (Vertical mounting, stabilizers not included)

160×373×336 mm (Vertical mounting, stabilizers included)

336×373×97 mm (Horizontal mounting)

1000BASE-T / 100BASE-TX / 10BASE-T (Wake On LAN/PXE boot supported) x2

RS-232C D-sub 9 pin (16550A compatible)×1 (Rear)

USB 3.0 compliant×6 (Rear: 6), USB 2.0 compliant×2 (Front: 2)

RJ-45×2 (Rear)

DP×2 (Rear), mini D-sub 15 pin×1 (Rear) (Triple monitor supported)

SATA HDD: 500GB / 1TB / 2TB (7,200rpm)

NEC Express5800/53Xi

NP8000-9011FP02/03/04/05/06

Intel® C226

DDR3-1600 (PC3-12800) SDRAM

Intel® Xeon® Processor E3-1275v3 (3.50GHz, 8MB Cache, Quad Core)

Intel® Xeon® Processor E3-1225v3 (3.20GHz, 8MB Cache, Quad Core)

4th Generation Intel® Core™ i3 Processor 4330 (3.50GHz, 4MB Cache, Dual Core)