This is information on a product in full production. For further information contact your local STMicroelectronics sales

office.

July 2015

DocID025157 Rev 3

1/4

SPC56D-Discovery

SPC560D-DIS Discovery evaluation board

Data brief

Features

• SPC560D40L1 32-bit 48 MHz e200z0h CPU,

32-bit Power Architecture® Technology CPU,

256 kB Code Flash in an LQFP64 package.

• On-board USB-JTAG PLS debugger and HW

selection mode to use stand-alone JTAG

debuggers.

• Board power supply: through external +12 V

PSU or from the USB bus (5 V supply voltage).

• Seven LEDs: D6 for 5 V power on,D2 for Reset,

D101, D102, D103 for PLS debugger section,

D7 and D8 for PC3 and PC2 outputs (for user)

• Two push buttons (reset and user)

• A potentiometers for ADC input (user)

• Two extension headers (2 x 36 pin - 100 mil) for

all LQFP64 pins and for quick connection to

prototyping boards, additional modules and

easy probing.

• JTAG interface (2 x 7 male 100 mil connector)

• USB port (mini -B)

• 16 MHz crystal

• Specification:

• Board size 100 x 55 mm

• MCU: SPC560D40L1 - LQFP64

• 2 extension headers 2 x 36 pin - 100 mil

• DC connector (+12 V input)

• Mini USB - B

• JTAG 2 x 7 - 100 mil connector

Description

The SPC560D-DIS Discovery is a low cost and

quick way to discover SPC56 D line.

Based on SPC56D40L1, the discovery board

includes a JTAG debugger from PLS, LEDs, push

buttons and extension headers to connect

prototyping boards or additional modules.

PLS UDE software is available for free download

and includes a perpetual 256 kByte.

debugging/programming license.

Free ready-to-run application firmware examples

are available inside SPC5Studio to support quick

evaluation and development.

SPC5Studio includes visual configurable code

generation engine, board support package (BSP),

startup routines, interrupt services, free RTOS

(optional) and a full set of low level drivers.

SPC5Studio includes HighTec GNU "C" compiler,

with a 30-days full free trial support. SPC5Studio

is available for free download.

The SPC56 D line is designed to address the

specific need of entry level car body applications

but as well many other markets where high

temperature operation, high reliability, low power

stand-by operation with quick wake up and real-

time loads diagnostic are required. An E2E

Community is available on ST WEB to get ST

experts support in getting started quickly with

SPC56 microcontrollers.

Table 1. Device summary

Order code

Reference

SPC560D-DIS

SPC56D-Discovery with

SPC560D40L1

www.st.com