Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

functional, but do not guarantee performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed

specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test

conditions.

Note 2: All voltages are measured with respect to GND, unless otherwise noted.

components and/or ESD protection circuitry are shown below for the LM95010’s pins. The nominal breakdown voltage of D3 is 6.5 V. SNP stands for snap-back

device. Devices that are connected to a particular pin are marked with a"U" in the table below.

Pin Name

PIN #

D1

D2

D3

D4

D5

R1

SNP

ESD CLAMP

V+/3.3V SB

1

UU

NC

2

UUUUUU

U

NC

3

NC

4

UU

UU

U

ADD0

6

UU

UU

U

ADD1

7

UU

U

SWD

8

UU

UU

U

Note 4: Human body model, 100 pF discharged through a 1.5 k

Ω resistor. Machine model, 200 pF discharged directly into each pin. See Figure 4 above for the ESD

Protection Input Structure.

Note 5: Thermal resistance junction-to-ambient when attached to a printed circuit board with 2 oz. foil is 210 ˚C/W.

Note 6: See the URL “http://www.national.com/packaging/” for other recommendations and methods of soldering surface mount devices.

Note 8: Limits are guaranteed to National’s AOQL (Average Outgoing Quality Level).

Note 9: The supply current will not increase substantially with SensorPath transactions.

Note 10: Temperature accuracy does not include the effects of self-heating. The rise in temperature due to self-heating is the product of the internal power

dissipation of the LM95010 and the thermal resistance. See (Note 5) for the thermal resistance to be used in the self-heating calculation.

Note 11: This specification is provided only to indicate how often temperature data is updated once enabled.

20082006

FIGURE 4. ESD Protection Input Structure. Devices that are connected to a particular pin are marked with a"U"in

the table above.

www.national.com

7