YRM2.DIODE

Y-Series

ZM1.WALL Wall mounting bracket

This standard bracket is used to mount the YR40 redundancy module onto a flat surface without utilizing a DIN-Rail.

Fig. 17-1 ZM1.WALL Wall mounting bracket

Fig. 17-2 Assembled wall mounting bracket

ZM11.SIDE Side mounting bracket

This bracket is used to mount the YR80 redundancy module sideways with or without utilizing a DIN-Rail.

The two aluminum brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can

be mounted.

For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on

the steel bracket.

Fig. 17-3

ZM11.SIDE Side mounting bracket

Fig. 17-4

Side mounting with DIN-rail brackets

Apr. 2014 / Rev. 1.4 DS-YRM2.DIODE-EN

All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted

www.pulspower.com Phone +49 89 9278 0

Germany

14/19