GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1653 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

9020-0617 Rev. J page 2 of 2

www.gamewell-fci.com

Installation

ASD-PL2F plug-in sensors use a separate base to

simplify installation, service, and maintenance. A

special tool allows maintenance personnel to plug-in

and remove sensors without using a ladder.

deep. Suitable mounting base boxes include:

•4.0"

(10.2 cm) square box.

•3.5"

(8.9 cm) or 4.0" (10.2 cm) octagonal box.

•

Single-gang box (except relay or isolator bases).

•

With B200S or B200SR base, mounted on a 4.0"

(10.2 cm) octagonal or square box.

•

With B224RB or B224BI base, mounted on a 3.5"

(8.9 cm) octagonal box, or a 4.0" (10.2 cm) octagonal or

square box.

NOTE: Because of the inherent supervision provided

by the SLC, end-of-line resistors are not required.

Wiring “T-taps” or branches are permitted for Style 4

(Class “B”) wiring.

Sensor Spacing

Gamewell-FCI recommends that the spacing sensors

be used in compliance with NFPA 72.

Specifications

ASD-PL2F, ASD-PTL2F, ASD-PL2FR:

Dimensions:

2.1”

(5.1 cm) height

Diameter:

4.1”

(10.4 cm) installed in the B501 base

6.1”

(15.5 cm) installed in the B210LP base

Shipping Weight: 5.2 oz. (147 g)

Operating

Temperature:

ASD-PL2F:

32° F to 120° F (0° C to 49° C)

ASD-PTL2F:

32° F to 100° F (0° C to 38° C)

Velocity Range:

0-4000 ft./min. (1,219.2 m/min.),

suitable for installation in ducts.

Relative

Humidity:

10-93% (non-condensing)

Thermal Ratings: Fixed-temperature setpoint

135° F (57° C)

Electrical Specifications

Voltage Range:

15 – 32 volts DC peak

Standby Current: (max. avg.): .0003 A @ 24 VDC

(One communication every 5

seconds with LED blink enabled).

Maximum Alarm-

Current:

.0065 A @ 24 VDC (LED) lit).

Bases and Options

B501

Plug-in sensor base without flange

Dimensions:

4.1”

(10.4 cm) diameter

B210LP

Flanged mounting base

Dimensions:

6.1”

(15.5 cm) diameter

B210LPBP

Flanged mounting base bulk pack

Dimensions:

6.1”

(15.5 cm) diameter

B224RB

Relay Base

Plug-in sensor base with auxiliary

relay, SPDT, rated 2 amps @ 30 VDC

(resistive).

Screw terminals:

2 coil latching relay 1 Form C contact

UL/CSA Rating:

0.9 A @ 125 VAC, inductive

0.9 A @ 110 VDC, inductive

3 A @ 30 VDC, resistive

Dimensions:

6.1”

(15.5 cm) diameter

Maximum: 25 devices between

isolator bases.

B200S

Intelligent sensor sounder base

Dimensions:

6.875”

(17.5 cm) diameter

B200SR

Standard sounder base, UL 8649th

Edition compliant, ULC Listed

Dimensions:

6.875”

(17.5 cm) diameter

RA100Z

Remote LED Annunciator

BCK-200

Black detector covers (box of 10)

DNR

Duct smoke housing